How To Remove & Clean Rust Stains From Vinyl Floor Tiles (PVC Floor Sheets)?

Do you want to clean rust stains on vinyl floor? Learning how to remove rust stains from PVC Floor! can be a challenge, but in this article, you are going to find some secrets to minimize these nasty stains.

How To Remove Rust Stains From The Vinyl Floors?

Before attempting to remove rust, thoroughly clean the area you want to treat. Thus, you will be able to differentiate the rust stains from the dirt stains to concentrate all your efforts on removing the rust. Clean rust stains with a cloth and a little warm water and detergent. Rinse the surface well and let it dry. But if this whole procedure doesn't work on rust, we'll need some really good, specialized products for the toughest stains.

The Best Safe & Useful Methods To Clean Rust Stains On Vinyl Floor 

Here are some natural products so that you can remove rust from the vinyl flooring without damaging it and of course preserving the environment since they are not polluting agents, you can use them effectively and safely without any inconvenience:

1. Oxalic Acid

The oxide can be quickly detached from the floor just by letting it act for a few minutes, and its application is very easy. Sprinkle the necessary amount of the product in the space where the rust is located. Then take a cloth that you no longer use and with which you can cover the stain completely, soak it in hot water and place it over it. You can put any old cloth too, the idea is that the acid does its effect correctly. Remember to use the gloves also read the instructions on the container. Exact time has elapsed. Pick up the cloth and clean the vinyl floor with a cloth and detergent, thus removing the remains of the applied product and cleaning the PVC floor, in this way the stain should completely disappear.

2. Sodium Bicarbonate (Baking Soda)

This is a unique element, it does not contain pollutants and it has not been reported to cause any type of allergies, so it is very safe to handle and apply to perform different cleaning at home. Like any product, it should be kept out of the reach of children under 12 years of age. Make a paste by adding four tablespoons of baking soda to two cups of warm water. Stir well until smooth. Now pour it over the affected area spread it so that it covers all the rust on the vinyl floor tiles and let it sit for half an hour. Then clean the area to remove the paste and check if the stain is completely removed, otherwise repeat the procedure and scrub a little with a sponge. After finishing clean the entire area well. Baking soda can be used to remove rust from any type of vinyl flooring, even the most delicate because although it does not act quickly, it is really effective and will not damage your floor.

3. Borax

it is also called cream of tartar or sodium borate, it is effective for cleaning different surfaces in the house, including clothes, however, it is not recommended to clean marble, it has a shine that if borax is applied could disappear. In a container, prepare a paste with a cup of borax, a tablespoon of lemon juice and two cups of warm water. Stir well and apply to the areas of the vinyl PVC floor where the rust is found. Leave for fifteen minutes to do its job well. You should have first cleaned this surface and left it free of dust and excess rust. Remove the mixture with an old rag by scrubbing the vinyl floor sheets. Then wash the floor with plenty of water and the detergent of your choice.

4. Lemon and borax

With the mixture of lemon and borax we can finish off rust stains on the floor quite easily. Mix a little lemon juice with two tablespoons of borax, mix well until a homogeneous paste is left, and apply the product to the area. Let it act for an hour and then rinse with a dry cloth. The rust will be gone.

5. Vinegar and Salt

Whichever of the two most common vinegars you decide to use will be effective in removing rust from the floor. So it can be Apple Cider Vinegar or White Vinegar. In a cup of vinegar, dissolve the necessary amount of salt to make a thick mixture. Then spread it over the stain with the help of a plastic spatula or with your hands if you are wearing gloves. Let it act for an hour. Then with a sponge you rub the surface and you are removing the mixture, check if the rust is completely removed and then clean the floor as you usually do.

If there is still rust, try a stronger remover. Before using a new product, read the package labels carefully, follow the directions, and protect your face and hands. Do a little test first in an inconspicuous spot on the surface and make sure the room is well ventilated. Rinse the entire surface after you finish.