- News Tag
- Office Raised Floor Solution
- Raised Access Floor System Guide
- Raised Floor Projects
- Vinyl Flooring Guide
- Access Floor Panels
- Access Floor Application
- Access Floor Categories
- Access Floor Accessories
- Access Floor Covering
- Raised Floor Specifications
Raised Floor Buying Guide - How To Identify Inferior Access Floors?
Now there are many raised floor manufacturers in the market, but the quality of raised floors is uneven. Some businesses only seek profits but do not guarantee the quality, resulting in a large number of inferior and unqualified raised floors in the market. These inferior products not only harm the interests of consumers, they may even cause serious safety accidents. As a manufacturer of high-quality raised floors, Huiya helps you identify low-quality raised floors.
How To Distinguish Low-Quality Raised Access Floor?
1: First of all, in terms of access floor panel thickness, inferior raised flooring is usually cut corners. For example, the standard thickness of raised floor steel panel is 0.7 / 0.8 or 1.0mm, while the thickness of inferior access floor is only 0.3 and 0.4mm, which can not reach the standard strength that the qualified raised access floor should have, so it is easy to cause the floor to crack.
2: In addition to the panel thickness of the raised floor, the floor accessory - the stringer
wall is also very important. Some manufacturers reduced the thickness of the beam wall from 0.8mm / 1.0mm to 0.3mm and 0.4mm. Inferior stringers would cause the middle of the raised floor to sag and swell up after being pressed, which will seriously cause the floor to collapse and break.
3: The thickness of the raised floor finish is not up to standard. The standard thickness of the raised floor finish used in warm southern regions can be 0.8mm / 1.0mm / 1.2mm / 1.5mm, while in cold northern regions it must be above 1.2mm. Inferior floor coverings do not reach this standard thickness, which directly leads to a greatly shortened floor life.
4: The conductive performance of the anti-static floor coating is not up to standard. Does the ESD surface's anti-static system resistance reach the standard of <1×106Ω~<1×1010Ω? If it can't, it will cause the floor which should have anti-static performance is not anti-static, which will cause static electricity to damage electronic equipment!
Therefore, although there are many raised floor suppliers available in the market now, and the prices offered by some manufacturers are indeed very exciting, but the old saying is "you get what you pay for". Don't be fooled by the low price and shop around, beware of buying inferior products. If you are still in trouble with choosing the right raised floor for your project, please contact us immediately! Huiya - your trusted flooring specializes in making high-quality raised floors for 20 years can help you out!